Regular price: £1,000.00 Ex VATMudMixer Owner’s: £100.00 Ex VAT
Paving Grout is a highly fluid, rapid-set slurry grout for stone, clay, concrete and porcelain paving. Supplied in 20kg bags, it fills joints from 5–50mm wide and 20–200mm deep in one application. Designed to meet BS 7533 requirements, it is suitable for domestic paving, paths, public spaces and carriageways.
Paving Grout combines selected sands, cements and additives to create a highly fluid jointing mortar for rigid, bound paving construction. Its slurry consistency allows it to be spread across the paving and worked into joints using a rubber squeegee.
Suitable for stone, clay, concrete and porcelain paving, it provides a strong joint finish for domestic, commercial and public realm projects. Its rapid-setting formulation allows early trafficking, subject to temperature and site conditions.
| Specification | Details |
|---|---|
| Bag size | 20kg |
| Joint width | 5–50mm |
| Joint depth | 20–200mm |
| Maximum aggregate size | 2mm |
| Water requirement | 3.7–4.3 litres per 20kg bag |
| Minimum mixing time | 3 minutes |
| Time to use | Within 20 minutes of mixing |
| Yield per bag | Approximately 12 litres |
| Foot traffic | After at least 2 hours, depending on temperature and site conditions |
| Vehicular traffic | After at least 6 hours, depending on temperature and site conditions |
| Typical compressive strength at 7 days | Greater than 30 N/mm² |
| Typical compressive strength at 28 days | Greater than 40 N/mm² |
| Typical flexural strength at 28 days | Greater than 6 N/mm² |
Use a suitable slow-speed, high-torque drill and mixing paddle. Mix each 20kg bag with 3.7–4.3 litres of clean water for at least 3 minutes until a uniform consistency is achieved.
Apply immediately after mixing and use within 20 minutes. Do not add extra water to make the grout more fluid, extend its working time or revive material that has begun to set.
Ensure paving surfaces are clean and free from contamination. Saturate the paving with clean water and keep it wet throughout the jointing process. Before applying the grout, clear joints of debris and standing water.
Spread the mixed grout using a suitable rubber squeegee. Keep it moving across the surface, repeatedly topping up the joints until they are filled. Remove as much excess grout as possible with the squeegee.
Keep the paving faces moist with a light, soft water spray until the grout in the joints has hardened sufficiently for cleaning. Do not wash too early, as this can affect colour, performance and joint levels.
Clean using water and a squeegee or brush, taking care not to disturb the joints. Continue until all surface residue is removed. Do not allow grout to dry or harden on the paving faces.
Do not use below 5°C, where ground frost is present or expected overnight, or when the air or paving temperature is 25°C and rising.
In warmer conditions, work early in the day, keep bags shaded, use cool mixing water and pre-soak the paving with cool water. Work in manageable areas.
Below 10°C, allow extra time for cleaning. Protect freshly grouted areas from foot traffic for at least 2 hours and vehicular traffic for at least 6 hours, depending on temperature and site conditions.
Store unopened bags in cool, dry conditions, raised off the ground on a pallet or shelf and protected from wind and rain.
Read the Product Data Sheet before use for full preparation, mixing and application guidance. Follow the safety instructions on the packaging before handling or using this product.
The MudMixer is a continuous-feed concrete mixer designed to mix bagged concrete, mortar and other cement-based materials quickly and consistently. Unlike traditional drum mixers, it continuously mixes material as you work, helping reduce downtime and increase productivity on site.
The name MudMixer comes from the construction industry’s long-standing use of the word mud to describe materials such as mortar, concrete, cement mixes and other wet construction products. While “mud” isn’t literally soil or earth, it’s a common term used by builders and tradespeople, particularly in North America, to refer to mixed cement-based materials.
Despite its name, the MudMixer isn’t designed for mixing soil or clay. It’s engineered to continuously mix a wide range of bagged construction materials, including concrete, mortar and sand-and-cement mixes, delivering a consistent, high-quality mix directly where you need it.
The name reflects the machine’s original roots, but its performance makes it an ideal solution for professional builders, landscapers, groundworkers, fencing contractors and anyone looking to mix concrete or mortar faster and more efficiently.
Simply load bagged material into the hopper, adjust the integrated water supply and the MudMixer continuously produces mixed material as required. There’s no need to stop and reload after every batch, making it significantly faster than conventional drum mixers.
The MudMixer is suitable for most pre-bagged:
* Concrete
* Mortar
* Sand and cement mixes
* Floor screeds (where manufacturer recommendations allow)
* Other cement-based bagged products
Always follow the material manufacturer’s guidance and ensure the product is suitable for continuous mixing.
While experienced DIY users can benefit from the MudMixer, it has been designed primarily for professional contractors, builders, landscapers, groundworkers and civil engineering teams who regularly work with bagged materials.
The MudMixer can process over 80 standard bags per hour under optimum working conditions, allowing you to keep working without the stop-start delays of traditional batch mixing. See the full MudMixer specifications or use our Concrete Calculator to estimate the material required for your next project.
Yes. The integrated adjustable water system helps deliver a consistent mix throughout the job, reducing waste and improving quality.
Yes. The MudMixer is designed so that one operator can efficiently mix material, allowing other team members to focus on laying, finishing, or other site activities.
Yes. Because the MudMixer continuously mixes material rather than producing individual batches, it can dramatically reduce mixing time and improve on-site productivity.
The MudMixer is perfect for:
* Garden rooms
* House extensions
* Foundations
* Footings
* Fence post installation
* Landscaping
* Patios
* Paths
* Kerbing
* Repairs
* Utility works
* Small civil engineering projects
It’s particularly useful where ready-mix wagons cannot access the work area.
Absolutely. One of the biggest advantages of the MudMixer is its portability. It can be wheeled into gardens, back gardens, alleyways and restricted-access sites where concrete wagons cannot reach.
The UK MudMixer operates from a standard 230V mains supply. Always use the correct power source and suitable extension leads for site conditions.
The MudMixer performs best when connected to a consistent water supply via hose, allowing the integrated water system to maintain the correct mix throughout operation.
Yes. Its robust wheeled design makes it easy to move around site and transport between jobs in a suitable van or trailer.
A MudMixer offers several advantages:
* Continuous mixing
* Less downtime
* Increased productivity
* Reduced labour requirements
* Consistent material quality
* Faster completion of jobs
For many contractors, the productivity gains can quickly offset the initial investment.
Please contact MudMixer UK or your authorised dealer to discuss current finance and payment options. Call 0300 373 5629 or email orders@mudmixer-uk.co.uk
MudMixers are available directly through MudMixer UK and selected authorised dealers. Look at the dealers section of our website.
Yes. All new MudMixers include a 2-year manufacturer’s warranty, giving you added confidence and support. Please refer to the warranty documentation supplied with your machine or contact MudMixer UK for full details.
Yes. We encourage contractors to experience the MudMixer in action. Contact MudMixer UK to arrange a demonstration or to discuss opportunities to see the machine in action on a live project.
Yes. Our UK team can provide technical support, product guidance and assistance with servicing and maintenance.
We recommend:
* Cleaning after every use
* Checking moving parts
* Inspecting electrical connections
* Checking hoses and fittings
* Following the maintenance schedule in the operator’s manual
The MudMixer helps reduce:
* Labour costs
* Mixing time
* Material waste
* Downtime between batches
It also enables teams to complete more work in a day, improving overall job profitability. Use our MudMixer Savings Calculator to estimate the potential labour and time savings for your business.
The MudMixer is particularly valuable for:
* Builders
* Groundworkers
* Landscapers
* Fencing contractors
* Utility contractors
* Civil engineering contractors
* Property developers
* Maintenance teams
Anyone who regularly uses bagged concrete or mortar can benefit from the increased productivity and efficiency that the MudMixer delivers.
